The new Preo 5 EASY Series applicators for hot-melt adhesives are the top innovation on the international market for their simplicity of use,
production flexibility, maintenance costs, quick installation, ease of safety standards, exceptional reliability and full integration with any
packaging line, granting the maximum operational flexibility. The new microprocessor controls all those operations necessary to the system
proper running: thermo-regulation in all different system areas, programming control of 8 glue tracks for each of the 8 independent
channels. Additional features are: Economy Function, Clock, Weekly Program, Max. temperature alarm, Sequential Heating of all channels
and delay Temperature Set Point lock.
NEW MELTING TANK
A large loading inlet, opened on three sides, makes the 5 kg
tank filling easier.
Unique in its category, the cover is quickly removable in order
to grant the maximum cleanliness and proper maintenance.
A new LCD display (specifically designed) graphically shows all
the machine sections (tank, manifold, hoses and guns with
respective parameters), allowing an immediate and extremely
easy system programming also by unskilled operators,
eliminating problems generated by codes and foreign
languages to understand and meaning that the displays are all
the same, independently of the country of use. A specific
notification area controls the system status constantly and
dynamically in all its operation phases. In case of eventual
alarms or faults error messages are displayed.
Another innovative feature of the new Easy Series is the “Rotary Switch”: the
selector through which it is possible, with extreme easiness, to program, modify
and set section by section all those parameters intended for the system running.
PRE-INSTALLED PNEUMATIC CONNECTIONS
These allow a quick and safe system commissioning.
All the internal parts of the applicator are easy to inspect thanks to a body system
easy to open.
NEW “PRECS” REVERSAL SYSTEM
The innovative electronic cylinder “PRECS” allows a perfect
and quick reversal preventing the lack of glue during this
operation and granting the maximum reliability.
HIGH PRECISION PNEUMATIC PUMP
The dual effect piston pump with ratio of 14:1 is especially
suitable for melting and application of adhesives and
thermoplastic materials with a viscosity of up to 30,000 Cps. It
is fully treated with a hard oxide coating and it is easy to
remove in case of maintenance or replacement. The pump
bottom can be inspected to check the suction ball status.
Easy to access and replace, it ensures a better distribution of
the adhesive preventing the nozzle clogging due to the
presence of impurities in the adhesive.
AUTOMATIC PRESSURE RELEASE VALVE
Supplied as a standard, it ensures the utmost safety during the
system use by automatically and safely releasing the adhesive
pressure into the system in the event of an emergency.